BACK                                                    NEXT

06/21/09 - Fuel Lines/Bottom End

OK.  Did work...

Mounted the fuel filter in the engine bay.  Should be easy to get to.  I machined that mounting bracket from billet.

Then I ran the -6 return line to a new bulkhead fitting on the tank (I still need a grommet.

Then I mounted the pump and ran the lines.  I feel like a lot of guys spend pretty big money on braided fuel lines then turn it into a hackjob by ziptieing it to frame members.  I wanted mine to be clean, so I used some shaker motor cable clamps.  These are easy to install and look/hold great.  (I also machined the fuel pump bracket)


Oh yeah... this too (thanks for the help, turbociv)

Upgraded oil pump drive collar...

BACK                                                    NEXT