02/09/07 – Finishing the
Ok, so... I finished all the tack
welding on the floor... I
received an offer from a guy at work to do the whole car, so as soon as
it soda blasted, he is going to seam weld the chassis1...
So, in the meantime, I picked up a can of this2 (So manly and Ted Nugent approved!):
It was 30 bucks a quart3, I hope it works well...
I am just going to leave it like this until the underbody/bay/interior has been blasted...
I should have welded it solid back then, but the results probably would have been a lot worse. That rust destroyer stuff worked pretty well, but the POR-15 I used later seemed to work a lot better.
(1) Or I could stop being a wuss and do it…
(2) I should have gotten POR-15
(3) POR-15 is about $130/gallon